AFFORDABLE GROUP A
SOLD
Sold
Motivated Vendor!
The VK SS Group A is one of the most collectable Brocks as it is a Bathurst Homologation Special as well as being a limited production run of only 500 units.
Build #274 has it’s original engine as well as a tuff 355 stroker that produces approx 430hp, a 5 speed Getrag, 3.55:1 diff gear’s put the power to the ground.
This example has only travelled 117,000kms from new with log books and HDT documentation and all other supporting paperwork.
Paintwork and trim are in exceptional condition!
For more information/organise an inspection please call Chester on 0414 239 028
About the VK HDT SS Group A
Capacity: 4.987 litre
Type: Conventional, watercooled four stroke, reciprocating piston type with 8 cylinders
Configuration: Front mounted, longitudinal, Vee configuration
Head: Pushrod and rocker actuated ohv with two valves per cylinder
Fuel System: Rochester Quadrajet 4 barrel downdraft type carburettor
Bore and Stroke: 101.6 x 76.8mm
Power: 196kw at 5200rpm
Torque: 418Nm at 3600rpm
Compression Ratio: 8.8:1
Ignition and Electrical:
12 volt negative ground
Exhaust:
5.0 litre V8: Single piece cast iron left and right cylinder banks, one outlet per bank.
5.0 litre V8 V5H: Low restriction exhaust system with white heat-proof coated headers
4 speed M21 Manual Transmission:
1st: 2.54:1
2nd: 1.83:1
3rd: 1.38:1
4th: 1.00:1
Reverse: 2.54:1
5 speed Borg-Warner T-5 Manual Transmission:
1st: 2.95:1
2nd: 1.94:1
3rd: 1.34:1
4th: 1.00:1
5th: 0.73:1
Reverse: 3.15:1
Clutch:
Single dry plate diaphram spring actuation type
Top Speed in Gears:
Group Three 4 speed manual:
1st: 77 km/h
2nd: 107 km/h
3rd: 142 km/h
4th: 210 km/h
0-100 km/h: 7.6 seconds
Standing Quarter Mile (400 metres): 15.7 seconds
Standing Quarter Mile (400 metres): n/a
Group A 4 speed manual:
1st: 87 km/h
2nd: 121 km/h
3rd: 161 km/h
4th: 215 km/h
0-100 km/h: 7.0 seconds
Standing Quarter Mile (400 metres): 15.0 seconds
Suspension:
Front: Fully independent, MacPherson struts with coil springs and anti-roll bar. Group A have Bilstein strut inserts and dampers, heavy duty stabiliser bar
Rear: Live axle located by trailing arms and Panhard rod. Coil springs and anti-roll bar; Group A have HDT rear stabiliser kit
Steering:
Power assisted rack and pinion, ratio 15.8:1
Turns lock-to-lock: 3.3
Brakes:
Split circuit system with power booster
Front: 281mm vented discs
Rear: 281mm discs
Wheels:
Group A: 7.0 inch x 16.0 inch HDT Alloys
Tyres:
Group A: Bridgestone Potenza 225/50 VR16
PLEASE STAY TUNED FOR MORE UP AND COMING MUSCLECARS!
THANKYOU FOR VISITING MUSCLECAR STABLES
Browse through the vast selection of vehicles that have recently been added to our inventory.
